Commercial Door & Frame Repair
Commercial Door & Frame Repair in Amarillo, TX
At Frog’s Safe & Key, we repair doors and door frames for commercial properties in and around Amarillo, TX. Whether the front door on your dental office sticks, the aluminum and glass door on your retail shop drags on the frame, or your warehouse door was damaged during a break-in, our skilled locksmiths will show up with all the tools, equipment, and hardware to get your doors working like new.
Doors on commercial properties get a lot of heavy use day after day, and wear shows in the frame, door, and hardware. We realign doors, repair bent or cracked frames, adjust hardware, and replace locksets so staff and customers can enter and exit easily while maintaining your building’s security.
Repair or Replace?
Some openings respond to repair and stay in service for years. We shim, anchor, and restore frame sections, then adjust hinges and closers. We recommend replacement when the leaf buckles, the frame rusts through, or the rail and stile separate.
Wind, dust, and sun push entries out of line across the Panhandle. We square the frame, reinforce weak points, and reset the strike so the latch catches. The door closes with less force, and access stays consistent through the day.
Common Door and Frame Problems We Can Repair
The edge of this commercial interior door was cracked from a failed attempt to kick it open. We were able to repair and reinforce the door with a stainless steel wrap plate and commercial-grade door lever set with a high-security lock.
Commercial doors are designed to withstand heavy, repeated use but need regular maintenance and repairs. Here are just a few of the types of issues we can fix:
- The door drags, sags, or scrapes the threshold
- The frame is out of square or cracked at the strike side
- The lock’s latch is out of alignment with the strike plate on the frame, and the door will not stay closed
- The overhead door closer wasn’t installed with the correct fasteners, and it detaches from the door frame
- A wood door is cracked, or a metal door is bent from a forced entry
- Closer leaks or slams near the end of travel
- Daylight shows around the door, and dust enters the lobby or hall
Our Repair Process
We start with measurements and a simple punch list. The team checks the reveal, hinge line, strike location, and closer settings. We document conditions and set a repair plan that fits your hours.
We reinforce the jamb where needed and reset anchors into the solid structure. Continuous hinges stabilize heavy or high-use doors and spread weight along the frame. We align the strike, set closer sweep and latch speeds, and confirm a smooth pull at the handle.
We finish with weather control and final tests. New weatherstripping and gasketing seal edges and reduce dust and drafts. We also test the latch, panic or exit device, and any access control to ensure the door and hardware work together.
Access Control Reliability and ADA Compliance
To meet ADA requirements, automatic door push plates must be easy to use, and the door must open at a safe speed and stay open long enough for someone using a wheelchair or other mobility aid to enter safely.
For a building’s access control system to work correctly and keep the property secure from unauthorized personnel, doors must be aligned to close and lock automatically after each use. To meet ADA compliance standards, automatic doors must be easy to operate via a push plate or motion sensors and have a controlled opening speed and duration. When you call us for maintenance or repair, we’ll ensure your automatic doors meet all local and state ADA requirements.
Weatherstripping, Gasketing, and Jamb Reinforcement for Homes and Businesses
Panhandle wind drives dust and cold air through small gaps around a door. We install weatherstripping, gasketing, and door sweeps that tighten the seal without heavy force. Thresholds meet the door edge and keep debris out.
Weak jambs create missed latches and easy pry points. We reinforce the strike side so the screws hold and the locks resist attacks. These upgrades add comfort and security in both residential and commercial settings.
Materials, Sites, and Local Conditions
Dry wind, dust, and temperature swings stress aluminum, hollow metal, and wood differently. We select anchors, seals, and hinge support that match each material and site. Tight, even gaps protect the frame and keep the latch reliable across seasons.
Aluminum storefront frames need stable rails and caps to protect glass. Hollow metal frames in service corridors need strong anchors and hinge support to carry weight. Solid core doors in offices, clinics, and homes gain a quieter close when reveals stay even.
Hardware We Service and Replace
- Door closers, pivots, butt hinges, and continuous hinges
- Locksets, exit devices, strikes, latch guards, thresholds, and door sweeps
Book Door & Frame Repair in Amarillo
Tell us what the door does during the day and where it struggles. Share a few photos or a quick note on dragging, slamming, drafts, or missed latches, and we will plan the repair and schedule the visit. Stop by our Amarillo storefront or request mobile service within 60 miles, and Frog’s Safe & Key will return your entry to safe, reliable operation. We’re locally owned and operated and ready to assist you with quality products and services. Contact us to get started.